View EL0611_5373522.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 1 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series features: ? high speed 10mbit/s ? 1 0 kv/s minimum common mode transient immunity at v cm = 1 k v ( e l0 611 ) ? guaranteed performance from - 40 to 8 5 ? wide operating temperature range of - 40 c to 100 c ? logic gate output ? high isolation voltage between input and output (viso= 37 5 0 v rms ) ? pb free and rohs and halogen free compliant . ? c ul appro ved (no. e214129) ? vde appro v ed (no. 40028116) ? semko approv ed ? nemko approv ed ? demko approv ed ? fimko approv ed description the el06 00 , el0601 and el061 1 devices each con sist s of an infrared emitting diode optically coupled to a high speed integrated photo detector logic gate with a str o b able output . the devices are packaged in an 8 - pin small outline package which conforms to the standard so8 footprint. applications ? ground loop elimination ? lsttl to ttl, lsttl or 5 volt cmos ? line receiver, data transmission ? data multiplexing ? switching power supplies ? pulse transformer replacement ? computer peripheral interface truth table (positive lo gic) input enable output h h l l h h h l h l l h h nc l l nc h pin configuration 1 , no connection 2 , anode 3, cathode 4 . no connection 5, gnd 6, vout 7, v e 8, v cc schematic 5 6 7 8 1 2 3 4 a 0.1f bypass capacitor must be connected between pins 8 and 5 *3
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 2 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series absolute maximum ratings ( t a =25c) parameter symbol rating unit input f orward current i f 20 ma enable input voltage not exceed v cc by more than 500mv v e 5.5 v reverse voltage v r 5 v power dissipation p d 40 mw output power dissipation p c 85 mw enable input current i e 5 ma output current i o 50 ma output voltage v o 7.0 v supply voltage v cc 7.0 v output power dissipation p o 100 mw isolation voltage *1 v iso 375 0 v rms operating temperature t opr - 40 ~ + 100 c storage temperature t stg - 55 ~ +1 2 5 c soldering temperature * 2 t sol 260 c notes *1 ac f or 1 minute, r.h.= 40 ~ 60% r.h . in this test, pins 1 , 2 , 3 & 4 are shorted together, and pins 5 , 6 , 7 & 8 are shorted together. *2 for 10 seconds .
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 3 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series electrical characteri stics (t a = - 40 to 85 c unless specified o therwise ) input parameter symbol min. typ. * max. unit condition forward v oltage v f - 1. 4 1. 8 v i f = 10 ma reverse v oltage v r 5.0 - - v i r = 1 0 a temp erature coefficient of forward voltage ? v f / ? t a - - 1.8 - mv/ c i f =10ma input capacitance c in - 60 - pf v f =0, f=1mhz output parameter symbol min. typ.* max. unit condition high level supply current i cch - - 10 ma i f =10ma, v e =0.5v, v cc =5.5v low level supply current i ccl - - 13 ma i f =0ma, v e =0.5v, v cc =5.5v high level enable c urrent i e h - - - 1.6 ma v e =2.0 v, v cc =5.5v low level enable c urrent i e l - - - 1.6 ma v e =0.5 v, v cc =5.5v high level enable v oltage v e h 2.0 - - v i f =10ma, v cc =5.5v low level enable v oltage * 4 v e l - - 0.8 v i f =10ma, v cc =5.5v transfer characteristics (t a = - 40 to 85 c unless specified o therwise) parameter symbol min. typ.* max. unit condition high level output current i oh - - 100 ua v cc = 5.5v, v o = 5.5v, i f =250a, v e = 2.0v low level output current v ol - - 0.6 v v cc = 5.5v, i f = 5ma, v e =2.0v,i cl = 13ma input threshold current i ft - - 5 ma v cc = 5.5v, v o = 0.6v, v e =2.0v,i ol = 13ma
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 4 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series switching characteristics (t a = - 40 to 85 c , v cc =5v, i f =7.5ma unless specified otherwise) parameter symbol min. typ.* max. unit condition propagation d elay t ime to output high level * 5 (fig.12) t phl - 35 7 5 ns c l = 15pf, r l =350 , ta=25 c propagation delay t ime to output low level * 6 (fig.12) t plh - 45 7 5 ns c l = 15pf, r l =350 , ta=25 c pulse width d istortion |tphl C tplh| - 10 35 ns c l = 15pf, r l =350 output rise t ime (fig.12) * 7 tr - 30 40 ns c l = 15pf, r l =350 output fa ll t ime (fig.12) * 8 tf - 1 0 20 ns c l = 15pf, r l =350 enable propagation delay time to output high level (fig.13) *9 t elh - 30 40 ns i f = 7.5 ma , v eh =3.5v, c l = 15pf, r l =350 enable propagation delay time to output low level (fig.13) * 10 t ehl - 20 30 ns i f = 7.5 ma , v eh =3.5v, c l = 15pf, r l =350 common mode transient immunity at logic high *11 el0600 cm h - - - v / s i f = 7.5 ma , v oh =2.0v, r l =350 , ta=25 c v cm =10vp - p (fig.14) el 0601 5,000 - - i f = 7.5 ma , v oh =2.0v, r l =350 , ta=25 c v cm =50vp - p (fig.14) el 0611 10,000 - - i f = 7.5 ma , v oh =2.0v, r l =350 , ta=25 c v cm =400vp - p (fig.14) el 0611 15 ,000 - - i f = 7.5 ma , v oh =2.0v, r l =350 , ta=25 c v cm =400vp - p (fig.15) common mode transient immunity at logic low *12 el0600 cm l - - - v / s i f = 0 ma , v ol =0.8v, r l =350 , ta=25 c v cm =10vp - p (fig.14) el0601 5,000 i f = 0 ma , v ol =0.8v, r l =350 , ta=25 c v cm =50vp - p (fig.14) EL0611 10,000 - - i f = 0 ma , v ol =0.8v, r l =350 , ta=25 c v cm =400vp - p (fig.14) EL0611 15,000 - - i f = 7.5 ma , v ol =0.8v, r l =350 , ta=25 c v cm =400vp - p (fig.15)
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 5 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series typical performance curves
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 6 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 7 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series 10% 90% output (vo) output (vo) input (i f ) i f =7.5ma i f =3.75 ma 1.5v tr tf t plh t phl output (vo) input ( v e ) 3.0v 1.5v 1.5v t e lh t e hl fig. 12 test circuit and waveforms for t phl , t plh , t r , and t f fig. 13 test circuit and waveform for t e hl and t e lh
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 8 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series switching p os . (b), i f =7.5ma switching p os . ( a ), i f = 0 cm l cm h v o (min) v o (max) peak v cm 0v 5v vo v cm 0.5v fig. 14 test circuit common mode transient immunity fig. 15 recommended drive circuit for EL0611 families for high - cmr
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 9 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series notes: *3 the vcc supply must be bypassed by a 0.1f capacitor or larger. this can be either a ceramic or solid tantalum capacitor with good high frequency characteristic and should be connected as close as possible to the package vcc and gnd pins *4 . enable input C no pull up resistor required as the device has an internal pull up resistor. *5 . tplh C propagation delay is measured from the 3.75ma level on the high to low transition of the input current pulse to the 1.5 v level on the low to high transition of the output voltage pulse. *6 . tphl C propagation delay is measured from the 3.75ma level on the low to high transition of the input current pulse to the 1.5 v level on the high to low transition of the output voltage pulse. *7 . tr C rise time is measured from th e 90% to the 10% levels on the low to high transition of the output pulse. *8 . tf C fall time is measured from the 10% to the 90% levels on the high to low transition of the output pulse. *9 . telh C enable input propagation delay is measured from the 1.5v le vel on the high to low transition of the input voltage pulse to the 1.5v level on the low to high transition of the output voltage pulse. *10 . tehl C enable input propagation delay is measured from the 1.5v level on the low to high transition of the input v oltage pulse to the 1.5v level on the high to low transition of the output voltage pulse. *11 cmh C the maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high state (i.e., vout > 2.0v). *12 cml C the maximum to lerable rate of rise of the common mode voltage to ensure the output will remain in the low output state (i.e., vout < 0.8v). order information part number el06x x (z) - v note x = part no. ( x = 0 0 , 01 or 1 1) z = tape and reel option (ta, tb or none). v = vde ( option al ) option description packing quantity none standard 100 units per tube - v standard + vde 100 units per tube ( ta ) ta tape & reel option 200 0 units per r eel ( tb ) tb tape & reel option 200 0 units per r eel ( ta ) - v ta tape & reel option + vde 200 0 units per r eel ( tb ) - v tb tape & reel option + vde 200 0 units per r eel
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 10 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series package drawing (dimensions in mm) recommended pad layout for surface mount leadform
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 11 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series device marking notes 0600 denotes device number y denotes 1 digit year code ww denotes 2 digit week code v denotes vde (optional) 0600 yww v el
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 12 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series tape & reel packing specifications tape dimension s dimension no. a 0 a1 b 0 d 0 d1 e f dimension(mm) 6.2 0.1 4.1 0.1 5 .28 0.1 1.50.1 1.50. 3 1.750.1 5 .50.1 dimension no. po p1 p2 t w k 0 k1 dimension(mm) 4.00.1 8 .00.1 2.00.1 0. 4 0.1 1 2 .0+0.3/ - 0.1 3.7 0.1 0.3 0.1 option t a option t b direction of feed from reel direction of feed from reel
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 13 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series solder reflow temperature profile disclaimer 150 ? c 1 - 3 ? c/sec max 6 0 C 12 0 sec 200 ? c 217 ? c >255 ? c (30s max ) 1 - 3 ? c/sec max 6 0 C 1 0 0 sec 260 ? c (peak) time (s)
8 pin sop high speed 10mbit/s logic gate p h otocoupler everlight electronics co., ltd. 14 http: // www.everlight.com document no dpc - 0000088 rev. 3 august 2 5, 2011 el06xx series 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in the se specification sheets. 3. these specification sheets include materials protected under copyright of everlight corporation. please dont reproduce or cause anyone to reproduce them without everlights consent.

▲Up To Search▲

Price & Availability of EL0611

	To Download EL0611 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .